Sub-tank homogenising mixer

The HM80P or HM100P homogeniser is designed to standardise oil emulsions in order to reduce the size of the fat or paraffin phase particles and to prepare a homogeneous blended or homogeneous solution.
When the phases are combined, the water molecules are better combined and the fat and water molecules are intensified.
The homogeniser is suitable for most products such as creams and ointments, lotions, sauces and flavour emulsions.

Two designs - a sub-tank version - designation HM80P and an InLine version - designation HM80.

The homogeniser is a rotor-stator type product and is a sub-tank homogeniser designed to homogenise the contents of a tank, e.g. when producing emulsions and after the addition of an emulsifier.

The rotor and stator are two cooperating pairs closely spaced.
The orientation of the rotor and stator teeth, as well as the pre-rotor used, allow the liquid to flow through the unit and enable shearing of the flowing liquid. The rotational speed of approx. 3000 rpm enables intensive shearing and mixing at the same time.
Rotor mounted on an extended shaft of the motor driving the homogeniser.

External body mounted with cap screws to the homogeniser body.
An o-ring seal is fitted between the outer body and the homogeniser body, in such a way that it can be washed off during the CIP washing process.
The shaft is sealed by a double seal with the possibility of supplying rinsing water at a specific temperature that can also heat the homogeniser body if required.
The external body and the homogeniser body are made of materials of considerable design specially shaped in the machining process, which contributes to the durability and reliability of the homogeniser's operation.

The pump is made of acid-resistant steel 1.4404 for parts in contact with the product and 1.4301 for other parts such as the casing or base.